Checking your HWID is a job for tools Windows already ships, and as of November 2026 it needs no download: Device Manager, PowerShell, PnPUtil, getmac and System Information cover it between them. There is no single HWID number to find. A device's hardware ID names its make and model, and Windows keeps up to 64 of them per device. The identifiers that point at your own PC are different: the 128-bit system UUID in the motherboard firmware and the serial numbers of the board and the drives.
One thing changed this year. WMIC, the command most older guides still teach, is gone from current Windows 11. Microsoft removed it from versions 24H2 and 25H2 in the August 2026 preview update. The PowerShell lines that replace it run on Windows 10 and 11 alike, and Command Prompt still has a route of its own.
| What is my HWID? | Several IDs, not one: device hardware IDs, the system UUID, motherboard and drive serials, MAC addresses |
|---|---|
| Point-and-click check | Device Manager, device Properties, Details tab, Hardware Ids |
| System UUID | PowerShell: Get-CimInstance Win32_ComputerSystemProduct | Select-Object UUID |
| Command Prompt | pnputil /enum-devices /connected /deviceids as administrator (Windows 11, version 21H2 or later) |
| WMIC | Removed from Windows 11 versions 24H2, 25H2 and 26H1 in 2026; use PowerShell |
| HWID checker download | Not needed: every check here uses a tool that ships with Windows |
What is my HWID?
Your HWID is a set of identifiers that Windows reads from your PC's parts, not one number, and the one that matters depends on who is asking.
The first group is device hardware IDs. Microsoft defines a hardware ID as a vendor-defined identification string that Windows uses to match a device to a driver package. A PCI device's hardware ID looks like PCI\VEN_1000&DEV_0001&SUBSYS_00000000&REV_02: a vendor, a device, a subsystem and a revision. It describes a product, not your individual unit: Microsoft's own example of the idea is "Product X made by company Y with firmware revision Z."
The second group points at one machine. The system UUID comes from the System Information structure in the motherboard's SMBIOS data. Win32_BaseBoard reports a manufacturer-allocated serial number for the motherboard, and Win32_DiskDrive reports a serial number the manufacturer allocated to each drive. Network adapters carry MAC addresses, and a TPM carries an endorsement key.
The longer explainer covers the three kinds of hardware id Windows keeps and where each one lives. When a game bans a PC, the penalty rides on identifiers its anti-cheat reads from the machine, which is how a hardware ban attaches to these identifiers instead of to a login.
Which Windows command shows which HWID?
Each kind of HWID has its own built-in Windows command, and none of them needs a download. The table maps the eight identifiers to the tool that reads each one.
| Identifier | Built-in tool or command | What it reports |
|---|---|---|
| Device hardware IDs | Device Manager; Get-PnpDeviceProperty; pnputil /enum-devices /deviceids | Up to 64 vendor strings per device |
| System UUID | Get-CimInstance Win32_ComputerSystemProduct | The 128-bit UUID from SMBIOS Type 1, or all zeros if none |
| Motherboard serial | Get-CimInstance Win32_BaseBoard | Manufacturer, product and serial number |
| Drive serials | Get-CimInstance Win32_DiskDrive | Model and serial number of each physical drive |
| BIOS serial and version | Get-CimInstance Win32_BIOS | SerialNumber and the SMBIOS BIOS version |
| MAC addresses | getmac | The MAC address of every network card |
| TPM endorsement key | Get-TpmEndorsementKeyInfo | The endorsement public key and its certificates |
| Computer hardware IDs (CHIDs) | ComputerHardwareIds (Windows Driver Kit, not built in) | GUIDs hashed from SMBIOS fields |
How do you check your HWID in Device Manager?
You check a device's HWID in Device Manager on its Properties sheet, under the Details tab. These are Microsoft's steps:
- In Windows search, type Device Manager and open it.
- Find the device in the tree.
- Right-click the device and select Properties.
- Open the Details tab.
- Under Property, select Hardware Ids. Compatible Ids sits in the same list.
Microsoft says the list is typically sorted from most to least suitable, so the top line is the most specific ID. Device Manager works one device at a time. To list every device together, or to read the system UUID and serial numbers, switch to PowerShell.
How do you check your HWID with PowerShell?
You check your HWID with PowerShell's Get-CimInstance cmdlet, which reads the WMI classes that hold each identifier. Open PowerShell from the Start menu and run the lines you need:
- System UUID:
Get-CimInstance Win32_ComputerSystemProduct | Select-Object UUID - Motherboard:
Get-CimInstance Win32_BaseBoard | Select-Object Manufacturer, Product, SerialNumber - Drives:
Get-CimInstance Win32_DiskDrive | Select-Object Model, SerialNumber - BIOS:
Get-CimInstance Win32_BIOS | Select-Object SMBIOSBIOSVersion, SerialNumber - Every device's hardware IDs:
Get-PnpDevice -PresentOnly | Select-Object FriendlyName, HardwareID
For a single value that belongs to the machine rather than to one part, run the UUID line. Win32_ComputerSystemProduct takes that value from the UUID member of the SMBIOS System Information structure. If the firmware supplies none, PowerShell shows a UUID of all zeros.
For one device, PowerShell can pull the same list Device Manager shows. Run Get-PnpDevice -PresentOnly, copy the InstanceId of the device you want, then run Get-PnpDeviceProperty -InstanceId '<InstanceId>' -KeyName DEVPKEY_Device_HardwareIds. The -PresentOnly switch limits the list to devices that are in the PC or attached to it right now.
How do you check your HWID in Command Prompt now that WMIC is gone?
You check your HWID in Command Prompt with PnPUtil for device IDs, getmac for MAC addresses, and a one-line PowerShell call for the UUID and serial numbers. All three ship with Windows, so the WMIC removal still leaves Command Prompt users a working route.
- Device hardware IDs: open Command Prompt as administrator and run
pnputil /enum-devices /connected /deviceids. PnPUtil sits in%windir%\system32on every version of Windows since Vista. The/enum-devicescommand arrived in Windows 10, version 1903, and the/deviceidsflag in Windows 11, version 21H2. - MAC addresses: run
getmac /v. It returns the MAC address of every network card, and/vadds verbose detail. - UUID and serials: run
powershell -Command "Get-CimInstance Win32_ComputerSystemProduct | Select-Object UUID". Swap in Win32_BaseBoard or Win32_DiskDrive for the other serials.
Microsoft's PnPUtil command syntax page lists which flags work on which Windows version. On Windows 10 builds older than that, the PowerShell route is the one that works.
Is WMIC still available to check your HWID?
As of November 2026, WMIC is no longer available on supported versions of Windows 11. Microsoft removed it from Windows 11 versions 24H2 and 25H2 in the August 2026 preview update, and from version 26H1 in the September 2026 preview update. It can't be added back as a Feature on Demand.
The deprecation itself is older. Microsoft deprecated WMIC in 2021, starting with a Windows 10 release, and has pointed people to PowerShell since. Only the wmic.exe command-line tool is gone. Windows Management Instrumentation (WMI) stays a supported part of Windows, so Get-CimInstance reads the same classes WMIC used to query.
Microsoft's WMIC removal notice recommends PowerShell, WMI APIs and other modern management tools. That notice covers Windows 11 only and does not say WMIC was removed from Windows 10. Even so, a guide that tells you to type a wmic command is teaching a deprecated tool.
Is there a built-in HWID checker in Windows?
Windows has no app called "HWID checker," but it ships every tool such an app would need, so a separate download is not needed for any check on this page.
- Run
msinfo32to open System Information, a view of the hardware, system components and software.msinfo32 /reportfollowed by a full file path saves that view as a text file. Use it for the overview; the UUID and serial numbers come from the PowerShell lines above. - For the TPM,
Get-TpmEndorsementKeyInfo -HashAlgorithm Sha256returns information about the TPM's endorsement public key and certificates, including a hash of the public key. The TPM guide explains how the tpm endorsement key ties to one chip. - For device IDs there is PnPUtil, which Microsoft says ships with every Windows release and recommends over the older DevCon.
Two hardware ID tools are not built in. ComputerHardwareIds, which prints the computer hardware IDs (CHIDs) Windows hashes from SMBIOS fields at every boot, and DevCon both come with the Windows Driver Kit, a developer download. For an HWID check, neither is needed.
How do you save your HWID to compare it later?
You save your HWID by piping the PowerShell output to Out-File, which writes it to a text file. Run this in PowerShell:
Get-CimInstance Win32_ComputerSystemProduct | Select-Object UUID | Out-File -FilePath .\hwid-before.txtGet-CimInstance Win32_BaseBoard | Select-Object Manufacturer, Product, SerialNumber | Out-File -FilePath .\hwid-before.txt -AppendGet-CimInstance Win32_DiskDrive | Select-Object Model, SerialNumber | Out-File -FilePath .\hwid-before.txt -Append
The file lands in the folder PowerShell is working in. By default Out-File overwrites an existing file without warning; -Append adds to the end instead, and -NoClobber refuses to overwrite.
A saved record earns its keep before a motherboard swap, a drive upgrade or a used-PC purchase, because you can run the same lines afterward and compare the two files. To see which of those values move after a hardware change, the change guide covers what a part swap does to each id on a Windows PC.
Is it safe to share your HWID?
Sharing a device hardware ID is low stakes, because it names a product model; the system UUID and serial numbers identify your own machine, so share those only with someone who needs them.
A string like PCI\VEN_1000&DEV_0001 says which product you have, and Windows uses it to pick a driver. The system UUID is a 128-bit identifier that Microsoft describes as different from every other generated UUID, and a serial number is a manufacturer-allocated number that identifies the physical part. Those values point at one PC.
Reasonable people to give them to: the PC or motherboard maker's support, or a game publisher's support team when they ask during an appeal. Publishers differ on what they accept; the round-up of hardware ban lengths and the appeal routes publishers offer lists them game by game.
How to check HWID: FAQ
How do I check my HWID on Windows 10?
You check your HWID on Windows 10 with the same Device Manager steps and PowerShell lines as on Windows 11. The pnputil /deviceids flag needs Windows 11, version 21H2 or later, so on Windows 10 use Get-PnpDevice or a powershell -Command call from Command Prompt instead.
Why does my system UUID show all zeros?
A system UUID of all zeros means the motherboard firmware supplied no UUID. Win32_ComputerSystemProduct reads the value from SMBIOS, and Microsoft documents that it falls back to all zeros when no UUID is available.
What does a hardware ID look like?
A device hardware ID looks like PCI\VEN_1000&DEV_0001&SUBSYS_00000000&REV_02: an enumerator such as PCI, then the vendor, device, subsystem and revision codes. A generic Plug and Play ID can be as short as root\*PNP0F08.
Can checking my HWID tell me if I'm banned?
Checking your HWID can't tell you whether a game has banned it. Windows shows the identifiers, not any game's ban list; the ban notice from the game is the record that counts. The list of games that enforce bans on hardware identifiers shows which titles act on them, and the guide to the legitimate routes back after a hardware ban covers appeals.
Windows changes. Check Microsoft's current documentation before you rely on a command here.